Showing posts with label cotton washable. Show all posts
Showing posts with label cotton washable. Show all posts

Tuesday, December 19, 2023

Figment Reversible, Double Purse or Bag

Finished, with the light side out

Finished, the dark side out

Showing the double sided bag

fBag cut out, pieced top

Stitching in the interfacing and darts

Putting it all together

Putting it all together - 2

Making the bag 2-sided

Stitching and turning

Continuing the 'Build'

Getting ready to add the strap/band

 

Wednesday, November 24, 2021

Tee-Shirt Quilts - so many ways to make them!




There's more than one way to make a quilt


Making a tee-shirt quilt, (I  have to admit, something I never wanted to do) requires some thinking about just how you want to go about it! Using the whole front of the shirt in the top, including the sleeves for a layered look or just squares the image on the front, a sort of 'meme quilt'? Individual squares fluffed up with batting? Individual block quilted or whole quilt quilted, as well as the usual 'where will this be used? Does it require batting or just a layer of cotton sheeting?


Use the whole front, layered?

Just use a portion to make 'meme's'?

Which ever way you choose, to keep the tee shirt portion from stretching, you will need to back them, perhaps with a muslin like fabric. Another option is that you could use an iron on interfacing, but consider how that leaves the fabric feeling a bit stiff, and determine for yourself whether, once completed, that might effect how your quilt will lay and feel. Neither option are right or wrong, just different. 

I think that I would be using a fabric, were I to make one, so that I can 'stuff' area's of the image with a high loft batting or even a little bit of pillow stuffing. For instance, in the image above, I might outline the cat using a black thread and straight stitch along the outside and along the white lines, and 'stuff' the cat before closing the last line, making it 'stand-out' from the rest of the image.

Saturday, October 16, 2021

Super Simple Two-sided Aprons

Making Aprons can be simple and they are fun to give. A gift that can be used over and over, and enjoyed by both giver and receiver! Mine are reversible, just as easy to  make as one sided, making them more 'seasonal.

Here's how I did it. The first time I made them, they were all in the same fabric, and I made a paper pattern using newspaper, to cut them all out. The second time, I simply used a measuring stick or tape, and a straight edged ruler (a quilting ruler in my case.) I started with a list of who I was making them for, decided on the fabric for each, and added that next to the name, then counted how many of each I would need. For adults, I cut the fabric I had purchased in 3 foot lengths. Each 3 foot length would be 2 apron sides. For the kids sizes, I made them 2 and 1/2 foot lengths for taller/bigger kids, 2 foot for our 5-8 year old's (and 3, but I sewed in a big fold, with long stitches that would easily pull out, because 3 grows quickly.) I did not make the kids narrower, as covering more rather than less kid felt like the right direction. As most fabrics are 40-45 inches wide, this will make each apron front 20-22 and 1/2 inches wide.

Once the lengths were cut, I marked the top of each with a pin and then for the adults marked off 4 inches on either side of the pin (making an 8 inch center top of the apron.) For the kids I marked off 3 and 1/2 inches for the bigger one's and 3 inches to either side of the center pin for the other's. Once the center tops were marked, using my handy ruler, I marked the angle to cut by selecting 12" (see the image below.) I then cut along the side angle lines, and then cut along the fold of fabric and had one side of 2 aprons cut out. Hold on to those corners for the next project!

Apron pattern for varied sizes


I continued until I had all the sides cut, and put them together with their 'other side' folded and set them aside for sewing. Before putting them together, you need 'straps', which can be tied/buckled (both neck and center) or a combination of tied/buckled and solid. They can be made of the same fabric that your aprons are, and if they are, you will need to cut for each adult (1 and 1/2 inch wide) 2 - 36 inch ties for the 'waist' and 1 - 24" for the top (that's what I used, but measure the length on yourself to be sure it fits, but don't forget to include the top of your apron in the size.) For the kids, I used 24 inches for the 'waist' and 20 inches for the top, although I used lace or ribbon or paracord on mine, to better match both sides of the apron.

Right sides together place straps
Straps pinned in, ready to sew
Strap sewed in, side sewing begun

Once you have everything (and if your using matching fabric ties, sewn along each side at 1/4 inch seams, turned to the right side, ironed and topstitched) pin the wrong sides of your apron together. Place the top strap inside, laying the right sides of match fabric together at the top of the apron, 1/4 inch from the edges. Lay the right side apron back into place matching the sides of the apron. You should now have the front and back (holiday and non-holiday in  my case, pinned together, with the top strap inside.) Sew the left side strap on, reversing to be sure it's in place to stay, 1/4 inch from the edge (at the end of the strap section) turn and sew down the angled side, using a 1/4 inch seam. 

Stop where the straight edge begins/turns, and lay in that sides tie, again, leaving the tie inside and matching fabrics. Sew the strap in, reversing to get it in good, and continue to finish other side in the same manner, leaving the top of the apron open. Once the right strap is sewed down, you can pull the right sides through, pull it tight to the stitching, iron and top stitch, 1/4 inch seams along all sides, except the top, that will need to be sewn just over the fold.

Reversible with Holiday and non-holiday sides
Matching, both non-holiday are dragonfly fabric
Sometimes, the color theme is what matches
It's not too difficult to 'size' them to fit everyone
Note the fold in the smallest, easy to 'let out'



Remember those corner pieces that were cut from the top of the aprons? I put them together, a little randomly, to create pot holders. With two random squares of fabric, some batting and a a little binding, these aprons will go to their reciepients with a 'sorta matching' pot holder, to make the gift even better.

Choose your pieces
Once begun you can chain stitch them 
After stitching they will require pressing!
Stuffed with 'wrap & zap' and stitched
Finished with bias tape!

Thursday, March 26, 2020

Face Masks

Regular size: 

one 6.5” x 9.5” cotton exterior layer  
- one 6.5” x 9.5” flannel inner exterior layer 
- two 6.5” x 9.5” cotton (unseen) interior layer 
- 4 Strings (at least 18” long) or, a 7” piece of rolled elastic knotted on both ends, or whatever you will use to affix this to a face. 

   Lay right side of external layers to right side of internal layers, and sew along top (as determined by any external layer decor) 1/4” from edge. Turn so that right sides face out, fold along seam line and press. 
   Lay one external right side up and place strings 1/4ish” below top and 3/8ish” on both right and left side, the end flush with the side of the fabric extending to the center (at the center, turn tied so they extend out the top. The elastic should be placed at the same top location, and extend down to the bottom. Knots should overlap the edge, but only just. Pin in place.   
    Lay right sides of external layers together. Pin sides and bottom. Starting at the top, stitch sides and bottom with 1/4” seam, being sure to catch the strings/elastic. Clip corners, turn, press. 
   Match tops and pin together. Decorative side topmost, Fold in half, lengthwise. Pin through all layers, marking fold line on right and left side, open back out. Decorative side topmost, fold under to pin you just placed, pin marking fold line. Do the same from the bottom. You should now have 3 equidistant pins along the sides. 
  Fold first line again and almost a 1/2” down, pin a tuck on both sides. Do the same with the other 2 pinned markings. 
   The tucks can go up or down, whichever, but not both. Either both are up or they are down. 
   Top Stitch tucks down - Match tops and approx 3” from right side sew 1/4” along to right corner. At corner, turn and continue, sewing tucks in place. Either back up over each tuck, or do this step from the top, twice. At approx. 1/4” from the bottom, turn and continue top stitching, at approx. 1/4 from left side, turn and continue top stitching, and the same at the top for approx. 3”, leaving at least a 2” opening for the insertion of a filter. Trim.


Friday, October 25, 2019

Table Wreaths

I found this table wreath, and really liked it. With a candle, a small vase, a handful of ornaments in the center, it's really a nice table brightener! So, I decided to try.